 |
 |
Aluminious building hoist ALULIFT 200
Alulift 200 is designed for small and medium building companies. It is based on a ladder mast made of aluminium alloy (2m mast section weighs less than 12 kg) with drive unit mounted in its bottom part. 
Cage of this hoist is lifted or lowered by winding main rope guided over the pulley block in the upper part of the mast. There are different models of the cage depending on transported materials. The cage is equipped with safety device which prevents the cage from falling down in case the rope breaks. It is possible to operate the hoist in vertical (Alulift 200 V) or inclined (Alulift 200 S) direction. The hoist is designed for 220V power supply system and can be connected to common electrical network.
| Model | ALULIFT 200 S | ALULIFT 200 V |
|---|---|---|
| Payload capacity | 200 kg | 200 kg |
| Speed | 25 m/min | 25 m/min |
| Lifting height | standard 13 m, max. 19 m to cornice |
standard 13 m, max. 60 m |
| Wire rope | diemeter 6,3 mm | diemeter 6,3 mm |
| Control voltage | 24 V | 24 V |
Power supply system - electric motor: 1 PEN 50 Hz 230 V - 1,5 kW
http://www.stros.cz/en/index.php/nakladni-vytahy/24-stavebni-hlinikovy-vytah-alulift-200.html#sigProGalleria57e23df2a7